Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  FS New Teleflex Steering Cable 9ft

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   FS New Teleflex Steering Cable 9ft
GlennO posted 08-02-2008 06:16 PM ET (US)   Profile for GlennO   Send Email to GlennO  
I installed this on my 1970 13 ft Sport, then added the Mini-Jacker and had to go with a longer cable. It has never been on the water. This is the correct length if using the standoff bracket or if you have a 20" transom and need no add-ons. Located in Sacramento area, Ca. I'd like $30 plus shipping. email is


Mister S posted 08-05-2008 10:37 AM ET (US)     Profile for Mister S    
Will it fit 1964 w/ 15" transom? Can't measure now, boat apart and upside down. e-mail sent
GlennO posted 08-05-2008 02:12 PM ET (US)     Profile for GlennO  Send Email to GlennO     
Mister S,
If you are converting to Teleflex from the original pulley steering my experience with the conversion includes:
1)If not using the TFlex stand-off bracket the steering rod will contact the cutout in the transom if passed through the engine torque-tube on a modern outboard. Or, at least it did on my '03 Honda 20HP.
2)The 9 ft cable is the correct length if it is routed through the same holes in the wood side pieces the pulley cables passed through after removing the roller (I dismounted the console to do this) and hugging the boat contour back to the transom.

I have not, as yet received your email.


GlennO posted 08-05-2008 06:46 PM ET (US)     Profile for GlennO  Send Email to GlennO     
Sold to Mister S. Thank you Dan!


Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.