Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  150 Mercury Blackmax

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   150 Mercury Blackmax
Austin Whaler posted 12-19-2008 12:17 AM ET (US)   Profile for Austin Whaler   Send Email to Austin Whaler  
I am looking at twin 150 mercury blackmax motors for my 1973 19' outrage. I only need 1 of these motors however. Just wondering if anyone wanted to split them, let me know.
L H G posted 12-19-2008 02:23 PM ET (US)     Profile for L H G    
I just installed one of those engines on my 19 Outrage. Be sure you get the 20" shaft length. Engines coming out of twin set could very well be 25's. current=Scan0005.jpg

high sierra posted 12-19-2008 09:42 PM ET (US)     Profile for high sierra  Send Email to high sierra     
Should be 20 inch shafts if twins and 25 if a single engine I believe. high sierra

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.