Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  Nantucket/Outrage MIlls Canvas/Whaler Canvas FS

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Nantucket/Outrage MIlls Canvas/Whaler Canvas FS
Yiddil posted 02-05-2009 05:49 PM ET (US)   Profile for Yiddil   Send Email to Yiddil  
I recently purchased three pieces of Mills Canvas for the above boat.

The Forward Dodger/w sleeve
The Connector Piece (connects the Forward Dodger to the Sun top
The Sun Top /sleeve

Came off a friends Nantucket. He no longer has this boat.

I was going to keep the extra canvas for spares but have decided not to at this point.

The Forward Dodger not only will fit the Natucket/Outrage, but also the 160 Dauntless for those of you who have this boat.(See Marlins install procedures) here in ref. section.

I am keeping the Sun Top

That leaves the extra MIlls Forward Dodger, Connector, and Whaler Bimini for sale.Please email me if you want any of the three pieces, or all of them...They are that Dark Blue and are in terrific shape.

Remember the Bow Dodger runs 1029.00 without shipping
The Bimini top is around 1144.00 and the connector is like 406.00

These did not come with install hardware but run about 60.00-80.00 from Mills from Suzanne for each Bow Dodger, Top. Connector needs no hard ware and just zips in.You can probabaly get the hardware locally for cheaper, and the install dicrections are down loadable from mills

Email me if seriously interested.


Yiddil posted 02-08-2009 09:23 PM ET (US)     Profile for Yiddil  Send Email to Yiddil     
Okay, last chance before they go to ebay...

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.