Author
|
Topic: Twin 1987 Yamaha 70 ETLH
|
98Dauntless |
posted 06-17-2009 07:30 PM ET (US)
Feeler,I have 2 motors,one running and one with a bearing that just went. The damaged motor was shut down immediately,so it should be an easy straight forward rebuild. Both motors are in exceptional condition. The comperssion on the bad motor (after the bearing went) is 115/110/110 and the running one 115/120/115. Both have stainless props and are comming off my Outrage 18. Depending what offers I get ,Ill either rebuild and keep the same setup(which I simply love) or repower. Looking to get $1400 for the running one,$600 for the one with bad bearings,or I can work ou a sweet deal($2800) for everything(complete dual setup,wireing,control cables(new),dual remote,2 sets of yamaha analog gauges,steering).All that will need to be done is repair the bad bearings.thanks ,Jerry
|
98Dauntless
|
posted 06-18-2009 03:15 PM ET (US)
please remember ,these are asking prices,a place to start,if your interested ,make an offer,thanks,Jerry |
Bertramp
|
posted 06-18-2009 03:47 PM ET (US)
Wanna get rid of the 18 outrage with the engines ? |
Bulldog
|
posted 06-18-2009 08:52 PM ET (US)
Tough to repower Jerry, those babies weigh 226 lbs. each, almost everything new is 100 lbs more. I have the same engines and also love them, you aren't the guy with the nice cloth motor covers are you, interested in the covers if you sell the motors. Good luck in your choice, when my time comes it will either be twin 90hp Etecs or a single 175..........Jack |
98Dauntless
|
posted 06-18-2009 10:45 PM ET (US)
Bertramp-The boat is listed for sale on whalercentral.If your interested shoot me a pm.Bulldog-I would love to go with the twin 90's or even a new 150 e-tech, but I just cant justify the expense right now. Just had our first baby ,lots of new expenses. As for the cloth motor covers, unfortunately they were stolen. I just went to see a possible replacement motor,a 2000 Yamaha 70 tlr on a 84 supersport. The guy said it was in good condition. I was shocked to see the boat in such bad condition, and as for the motor, my 87's are in much better condition. Some people are delusional!
|
98Dauntless
|
posted 06-20-2009 09:58 PM ET (US)
Well,I just purchased a mint 1988 Yamaha 70 as replacement,so if you want to buy the setup its with 3 motors, 2 woring with 1 for parts! |
68 WhaleR
|
posted 06-21-2009 09:42 AM ET (US)
What are you looking for the 3 motor setup? I emailed you about it. Was the broken motor counter rotating and is the new one the same? thanks Erick |
98Dauntless
|
posted 06-21-2009 01:12 PM ET (US)
No cr motors werent available in this size,it came from the BW factory this way.So I assume it wasent necessary. I pmed you back. Jerry |
98Dauntless
|
posted 06-21-2009 09:12 PM ET (US)
sale pending |
68 WhaleR
|
posted 06-22-2009 01:13 PM ET (US)
Down payment Sent! Thanks Jerry! |
Tohsgib
|
posted 06-22-2009 01:19 PM ET (US)
Spend the winter putting new bearings in #3 and then run trips next fall. |
Tohsgib
|
posted 06-22-2009 01:20 PM ET (US)
I meant spring, not fall. |