Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  Someone please put this Whaler to rest.

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Someone please put this Whaler to rest.
bloller posted 09-15-2012 11:12 PM ET (US)   Profile for bloller   Send Email to bloller  
http://annapolis.craigslist.org/boa/3262907207.html I've actually seen a 13' Whaler almost as bad as this still in service as a marina workboat.
Powergroove803 posted 09-16-2012 09:08 AM ET (US)     Profile for Powergroove803  Send Email to Powergroove803     
Is that a 19 lowpro? Sute looks like my a 19 banana
Buckda posted 09-16-2012 10:33 AM ET (US)     Profile for Buckda  Send Email to Buckda     
He wants $500. That trailer is worth $500, plus you can get around 3-500 for the console and probably $150 out of the engine (assuming it's generally dead)...$50 for the steering wheel, $25 for the bow and stern lifting eyes...and you'll owe around $150 to the dump for a disposal fee for the carcass.

If all that work is worth somewhere around $5-700 dollars net, then it's a decent deal.

:)

6992WHALER posted 09-16-2012 11:06 AM ET (US)     Profile for 6992WHALER  Send Email to 6992WHALER     
From the Add "CENTER CONSOLE IS SOLD - !! - FRONT HATCH COVER IS SOLD!"
boatmanmark posted 09-16-2012 11:29 AM ET (US)     Profile for boatmanmark  Send Email to boatmanmark     
What, just a little fiberglass and she is as good as new.
Binkster posted 09-16-2012 01:22 PM ET (US)     Profile for Binkster  Send Email to Binkster     
Everything runs out of value at some point. What makes you think the trailer is part of the deal? Besides its plain to see the axles,springs are rusted. Hopefully it will make it to the landfill with the boat. The outboard? You can find a better one for $500. Forgetaboutit.

rich

martyn1075 posted 09-16-2012 03:17 PM ET (US)     Profile for martyn1075  Send Email to martyn1075     
20 bucks? I don't know. Make a cool planter out of it maybe.
PeteB88 posted 09-16-2012 05:47 PM ET (US)     Profile for PeteB88  Send Email to PeteB88     
Take the hardware off the boat and stainless - it makes me sick to see a great boat wind up like that - what happened to it/?
martyn1075 posted 09-17-2012 02:33 AM ET (US)     Profile for martyn1075  Send Email to martyn1075     
quote:
No holes in bottom of hull

Seriously? Well at least there are no holes. Its missing most of the bow, the back corner portion has been completely torn apart where chucks of foam are missing a small animal could take winter shelter but no worries! there are no holes on the bottom!

LMAO

brisboats posted 09-17-2012 09:22 AM ET (US)     Profile for brisboats  Send Email to brisboats     
I know the boat well it was used as a push boat for many years in a Marine construction business. SRC or South River Marine construction. In the last 10-15 years I believe it has had 3-4 motors from our yard mounted on it.
The owner called me and asked me what do with it and I suggested CL. It was mine for free or close and I passed as our disposal rate is now $200 a ton.
Plate alloy boats fare much better than that Whaler did.

B

L H G posted 09-17-2012 05:01 PM ET (US)     Profile for L H G    
As I have been saying all along, good used 1st generation Outrage 19's are getting hard to find!
andygere posted 09-19-2012 03:07 PM ET (US)     Profile for andygere  Send Email to andygere     
You could probably convert it to a very serviceable dock that would float for many more years...
tom976 posted 09-20-2012 04:15 PM ET (US)     Profile for tom976  Send Email to tom976     
That isnt a 20' boat anymore. Looks like it lost a few feet from abuse... Any idea what oil tanker road over it??
David Pendleton posted 09-21-2012 11:32 PM ET (US)     Profile for David Pendleton  Send Email to David Pendleton     
My guess is that's Hurricane damage.
17 bodega posted 10-01-2012 05:16 PM ET (US)     Profile for 17 bodega  Send Email to 17 bodega     
Chainsaw?
martyn1075 posted 10-01-2012 08:08 PM ET (US)     Profile for martyn1075  Send Email to martyn1075     
Thats right it was used in a part of that old slasher horror flick "Chainsaw Massacre"
djacksonrn posted 10-02-2012 06:24 AM ET (US)     Profile for djacksonrn  Send Email to djacksonrn     
I think I found the sellers brother in Savannah....

http://savannah.craigslist.org/boa/3310446308.html

honestly....

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.