WTB: Misc. 18-Outrage parts - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  WTB: Misc. 18-Outrage parts

search | FAQ | profile | register | author help

Author Topic:   WTB: Misc. 18-Outrage parts

ratherwhalering posted 04-09-2014 02:13 PM ET (US)
Just bought a 1984 18-Outrage and I'm looking to buy the following OEM parts used. Perhaps you have them in your garage? Dirty little hoarder :-)
(1) Teak sump cover
(1) Under gunnels rod holders (three are good)
(2) Cooler Cleats
(1) Stern Light Holder Blocks
(1) Teak Stern Light Base
(1) Cover
(1) Bimini
(1) Stern light gunnels ring
(1) Stern light assembly
(1) Console all around light assembly
(5) Swim platform teak strips
(1) Beckson “kaki” thin ring 8” deck plate
(2) Springfield Yachtsman II seats w/o base, no pedestal

jimd posted 04-09-2014 08:25 PM ET (US)
I have a mint OEM sump cover and used cooler cleats in good shape available. I have 3 rod racks as well. Send me an email via my profile if interested. I may have the deck plate ring as well. Thanks Jim D
Tom W Clark posted 04-09-2014 09:22 PM ET (US)
I have the stern light mounts/holders/ring-thingy
Jeff posted 04-09-2014 11:48 PM ET (US)
Rob,
You can't post a "Want to buy parts" ad for a new boat without telling more about your said project and showing pictures.
Tom W Clark posted 04-10-2014 10:11 AM ET (US)
Rob is both an attorney and and insurance salesman. Probably the best negotiator I have ever met.
He managed to pick a 1984 Outrage 18 with a 2008 Yamaha F150 four stroke with about 300 hours on it. It sits on a tandem axle Pacific galvanized trailer.
No bottom paint. Sea trail went flawlessly.
Anybody care to speculate how much that set him back in Marin County, CA?
Marko888 posted 04-10-2014 11:31 AM ET (US)
I have a masthead light that I removed from my Outrage 18. I m i g h t....consider parting with it... if some console rod holder tubes were part of the offer...
Also have some under gunwale rod holders, a set of 4, that need to be re varnished. They have been partially stripped.
Sump cover is about $40 brand new from Blackduck Gallery.
Lastly, I have a Mills Bimini off our boat that we have only used once in the last two years. I would sell this as I figure a flying top set will be more useful to us. Not sure how expensive shipping from BC to the Bay Area would be.
It's probably best if we don't learn what Rob paid...Tom's hints indicate jealousy might ensue...
ratherwhalering posted 04-10-2014 12:26 PM ET (US)
Jim, check your e-mail, I'm interested in whatcha got!
Marko, rod tubes you say? How many do you need, I have plenty. I want your masthead light! I have the console fitting. I only need one under gunnel rod holder, I have three that are in great shape, and I hate to break up a set. Jim has three, so if I get one, he still has at least one set. I'll probably pass on the bimini for now, shipping costs would likely be too much. My folks are sailing up to Puget Sound/BC this summer so we can revisit this later.
The newest addition to my fleet was a bargain, and is almost completely original. It's an elbow grease project and should come out spectacular :-) The console needs some love, but nothing I haven't seen before. I have all the parts in my garage, save what is listed above.
jflots posted 04-10-2014 12:42 PM ET (US)
Hears what I have:
- console rod holders with teak cleats, full set
- console doors, side and back with hinges and latches,
- fire extinguisher box and frame
- console mast light
- gunwale mast light with bases
- gauge and switch panels
ratherwhalering posted 04-10-2014 01:27 PM ET (US)
Link to some pics for those who are curious:
http://smg.photobucket.com/user/ratherwhalering/library/Outrage-18
ratherwhalering posted 04-10-2014 01:33 PM ET (US)
Awesome Joe, e-mail me your contact info :-)
cj85 posted 04-10-2014 02:21 PM ET (US)
Sure is a nice looking 18 you have there. I'd probably be mad if I knew what you paid for it ( dince Tom says your a great negotiator). I'm from the north end of marin and commonly see less clean 2 stroke powered 18s for 10k+. I'd love to compare data with you once I splash my 85 18 powered by twin 70 yamahas in the next few weeks. Congrats on the new boat!
Cj
Marko888 posted 04-10-2014 04:18 PM ET (US)
Rob,
I only need two tubes. I think you'll have my email address from our comms last fall about Montauk seats. If not, you'll find my website in my profile.
Mark Cahill
ratherwhalering posted 04-12-2014 10:32 AM ET (US)
Looks like I'll need a set of four under gunnel rod holders, I broke one and the remaining two are shot
Tom W Clark posted 04-12-2014 11:09 AM ET (US)
Why is it Rob asks for help and folks come out of the woodwork to help him and send him parts, but when I ask for help locating one little itsy-bitsy part (for the benefit of a friend, no less) it is met with total silence?
http://continuouswave.com/ubb/Forum2/HTML/021960.html
irishcreamer posted 04-12-2014 10:53 PM ET (US)
I think I know the boat...has a kicker also...
Rob, I have the following:
(2) Cooler Cleats
-Free to you if you like.
(1) Cover
- Used but in good shape, from MN. Dark blue. I'm 90% sure this is the exact cover. If interested we can discuss a fair price.
-https://secure.overtons.com/modperl/product/details.cgi?r=view&i=72776
-Covermate Sharkskin Plus Exact-Fit Boat Cover - '84-'91 Boston Whaler Outrage 18

I was about to order a set of under gunwale racks....maybe we can order together.
Email or call if interested.
IC
ratherwhalering posted 04-14-2014 01:57 PM ET (US)
jflots shoot me an e-mail and I'll forward my cell phone number.
rschmidtlaw@hotmail.com
jdizzie posted 04-14-2014 02:43 PM ET (US)
I have in my possession the bow dodger, and flying top for a 1984 18' outrage, with teak gunnels. The bow dodger needs new eisenglass. Located in CT.
jtd4785@gmail.com
andygere posted 04-15-2014 12:56 PM ET (US)
Rob,
I have a full teak swim platform (no tubes or hardware) that will probably fit. It's in nice shape but needs refinishing. Yours in trade for a folding seatback cushion already in my possession. Let me know when you can stop by to get it, be sure to bring your foulies and fishing license.
ratherwhalering posted 04-15-2014 01:57 PM ET (US)
Andy! Do I have to repay the 12-pack of Lagunitas you left in my cooler? I have 6 bottles of Pliny the Elder in my fridge right now...
ratherwhalering posted 04-15-2014 02:04 PM ET (US)
Joe (Jflots) I'm interested in your gunwale mast light with bases. Shoot me an e-mail when you have a chance.
andygere posted 04-15-2014 05:52 PM ET (US)
Rob, the beer exchange is up to you, but I prefer that done on the water from inside somebody's boat on a sunny day. All high quality craft brew qualifies.
Bulldog posted 04-16-2014 04:48 PM ET (US)
Tom Clark, even when you ask why they ignore your request you get ignored, no worry bud! I love ya Man! I just don't have that silly part you were looking for!.....Jack

PS: Nice Ride Rob!

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: WTB: Misc. 18-Outrage parts
ratherwhalering	posted 04-09-2014 02:13 PM ET (US) Just bought a 1984 18-Outrage and I'm looking to buy the following OEM parts used. Perhaps you have them in your garage? Dirty little hoarder :-) (1) Teak sump cover (1) Under gunnels rod holders (three are good) (2) Cooler Cleats (1) Stern Light Holder Blocks (1) Teak Stern Light Base (1) Cover (1) Bimini (1) Stern light gunnels ring (1) Stern light assembly (1) Console all around light assembly (5) Swim platform teak strips (1) Beckson “kaki” thin ring 8” deck plate (2) Springfield Yachtsman II seats w/o base, no pedestal
jimd	posted 04-09-2014 08:25 PM ET (US) I have a mint OEM sump cover and used cooler cleats in good shape available. I have 3 rod racks as well. Send me an email via my profile if interested. I may have the deck plate ring as well. Thanks Jim D
Tom W Clark	posted 04-09-2014 09:22 PM ET (US) I have the stern light mounts/holders/ring-thingy
Jeff	posted 04-09-2014 11:48 PM ET (US) Rob, You can't post a "Want to buy parts" ad for a new boat without telling more about your said project and showing pictures.
Tom W Clark	posted 04-10-2014 10:11 AM ET (US) Rob is both an attorney and and insurance salesman. Probably the best negotiator I have ever met. He managed to pick a 1984 Outrage 18 with a 2008 Yamaha F150 four stroke with about 300 hours on it. It sits on a tandem axle Pacific galvanized trailer. No bottom paint. Sea trail went flawlessly. Anybody care to speculate how much that set him back in Marin County, CA?
Marko888	posted 04-10-2014 11:31 AM ET (US) I have a masthead light that I removed from my Outrage 18. I m i g h t....consider parting with it... if some console rod holder tubes were part of the offer... Also have some under gunwale rod holders, a set of 4, that need to be re varnished. They have been partially stripped. Sump cover is about $40 brand new from Blackduck Gallery. Lastly, I have a Mills Bimini off our boat that we have only used once in the last two years. I would sell this as I figure a flying top set will be more useful to us. Not sure how expensive shipping from BC to the Bay Area would be. It's probably best if we don't learn what Rob paid...Tom's hints indicate jealousy might ensue...
ratherwhalering	posted 04-10-2014 12:26 PM ET (US) Jim, check your e-mail, I'm interested in whatcha got! Marko, rod tubes you say? How many do you need, I have plenty. I want your masthead light! I have the console fitting. I only need one under gunnel rod holder, I have three that are in great shape, and I hate to break up a set. Jim has three, so if I get one, he still has at least one set. I'll probably pass on the bimini for now, shipping costs would likely be too much. My folks are sailing up to Puget Sound/BC this summer so we can revisit this later. The newest addition to my fleet was a bargain, and is almost completely original. It's an elbow grease project and should come out spectacular :-) The console needs some love, but nothing I haven't seen before. I have all the parts in my garage, save what is listed above.
jflots	posted 04-10-2014 12:42 PM ET (US) Hears what I have: - console rod holders with teak cleats, full set - console doors, side and back with hinges and latches, - fire extinguisher box and frame - console mast light - gunwale mast light with bases - gauge and switch panels
ratherwhalering	posted 04-10-2014 01:27 PM ET (US) Link to some pics for those who are curious: http://smg.photobucket.com/user/ratherwhalering/library/Outrage-18
ratherwhalering	posted 04-10-2014 01:33 PM ET (US) Awesome Joe, e-mail me your contact info :-)
cj85	posted 04-10-2014 02:21 PM ET (US) Sure is a nice looking 18 you have there. I'd probably be mad if I knew what you paid for it ( dince Tom says your a great negotiator). I'm from the north end of marin and commonly see less clean 2 stroke powered 18s for 10k+. I'd love to compare data with you once I splash my 85 18 powered by twin 70 yamahas in the next few weeks. Congrats on the new boat! Cj
Marko888	posted 04-10-2014 04:18 PM ET (US) Rob, I only need two tubes. I think you'll have my email address from our comms last fall about Montauk seats. If not, you'll find my website in my profile. Mark Cahill
ratherwhalering	posted 04-12-2014 10:32 AM ET (US) Looks like I'll need a set of four under gunnel rod holders, I broke one and the remaining two are shot
Tom W Clark	posted 04-12-2014 11:09 AM ET (US) Why is it Rob asks for help and folks come out of the woodwork to help him and send him parts, but when I ask for help locating one little itsy-bitsy part (for the benefit of a friend, no less) it is met with total silence? http://continuouswave.com/ubb/Forum2/HTML/021960.html
irishcreamer	posted 04-12-2014 10:53 PM ET (US) I think I know the boat...has a kicker also... Rob, I have the following: (2) Cooler Cleats -Free to you if you like. (1) Cover - Used but in good shape, from MN. Dark blue. I'm 90% sure this is the exact cover. If interested we can discuss a fair price. -https://secure.overtons.com/modperl/product/details.cgi?r=view&i=72776 -Covermate Sharkskin Plus Exact-Fit Boat Cover - '84-'91 Boston Whaler Outrage 18 I was about to order a set of under gunwale racks....maybe we can order together. Email or call if interested. IC
ratherwhalering	posted 04-14-2014 01:57 PM ET (US) jflots shoot me an e-mail and I'll forward my cell phone number. rschmidtlaw@hotmail.com
jdizzie	posted 04-14-2014 02:43 PM ET (US) I have in my possession the bow dodger, and flying top for a 1984 18' outrage, with teak gunnels. The bow dodger needs new eisenglass. Located in CT. jtd4785@gmail.com
andygere	posted 04-15-2014 12:56 PM ET (US) Rob, I have a full teak swim platform (no tubes or hardware) that will probably fit. It's in nice shape but needs refinishing. Yours in trade for a folding seatback cushion already in my possession. Let me know when you can stop by to get it, be sure to bring your foulies and fishing license.
ratherwhalering	posted 04-15-2014 01:57 PM ET (US) Andy! Do I have to repay the 12-pack of Lagunitas you left in my cooler? I have 6 bottles of Pliny the Elder in my fridge right now...
ratherwhalering	posted 04-15-2014 02:04 PM ET (US) Joe (Jflots) I'm interested in your gunwale mast light with bases. Shoot me an e-mail when you have a chance.
andygere	posted 04-15-2014 05:52 PM ET (US) Rob, the beer exchange is up to you, but I prefer that done on the water from inside somebody's boat on a sunny day. All high quality craft brew qualifies.
Bulldog	posted 04-16-2014 04:48 PM ET (US) Tom Clark, even when you ask why they ignore your request you get ignored, no worry bud! I love ya Man! I just don't have that silly part you were looking for!.....Jack PS: Nice Ride Rob!