Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  Wm. J Mills Custom Covers - 210 Outrage

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Wm. J Mills Custom Covers - 210 Outrage
Swab posted 06-07-2014 11:41 AM ET (US)   Profile for Swab   Send Email to Swab  
Purchased this Spring (March 2014).

FOR SALE - I have genuine Wm. J. Mills & Co. Canvas made from Sunbrella material in navy blue "captain navy". I have a full storage/mooring cover, deluxe leaning post with livewell cover and a console cover.

Each piece was used for less than a week and I only used the full cover for a few days while it was on the trailer while in my driveway before putting my 210 Outrage on my covered ShoreStation boat lift. Once it was on the covered lift, I used the new matching Sunbrella Console cover along with a new matching cover for the Deluxe Leaning Post w/livewell. The full storage/mooring cover, deluxe leaning post/livewell cover and console cover were ALL used less than a week before unexpectly deciding to sell my 210 Outrage.

The full storage/mooring cover with all unused hardware will fit a 2002-2008 210 Outrage without a full bow rail. The Mills part number is 50-1559-01

The console cover with all unused hardware will also fit the console used on the 190 Outrage. The Mills part number is 50-1630-00

The deluxe leaning post with livewell cover and all unused hardware will also fit a 240 Outrage and a 270 Outrage with the same seating combination. The Mills part number is 50-1558-00

I now own a different Boston Whaler so these items are for sale and someone will get an awesome deal. All three of these Sunbrella pieces were around $1,800.00 plus shipping. Obviously I'd like to get as much money for these items as I can but I'll consider ANY REASONABLE offer.

fno posted 06-09-2014 12:26 AM ET (US)     Profile for fno  Send Email to fno     
Is your mooring cover cut for a T-top?
Swab posted 06-11-2014 05:37 PM ET (US)     Profile for Swab  Send Email to Swab     
No, the mooring cover is NOT cut for a hard top. I had a bimini top in lieu of the hard "T" top.
fno posted 06-11-2014 06:44 PM ET (US)     Profile for fno  Send Email to fno     
OK, thanks. I would have to make some major mods to fit the T-top.
Jeff posted 06-11-2014 10:47 PM ET (US)     Profile for Jeff  Send Email to Jeff     
Swab,

Does it go over the bow rails? Do you have pictures of on the boat?

Jeff posted 06-11-2014 10:49 PM ET (US)     Profile for Jeff  Send Email to Jeff     
Sorry, I was referring to the mooring cover?
Swab posted 06-15-2014 09:29 PM ET (US)     Profile for Swab  Send Email to Swab     
It goes over the standard lower rails, not a raised bow rail. Unfortunately I only used the cover a couple days while it was in the driveway so I don't have any pictures. There might be pics. on the Mills website.
Swab posted 08-27-2014 08:37 AM ET (US)     Profile for Swab  Send Email to Swab     
I'm lowering the prices hoping to sell within the next couple months or sooner! All three pieces for $800.00 plus shipping. This is over 50% off from what I paid and they're as close to brand new and unused as you will ever find. Again, $800.00 plus shipping or shoot me a reasonable acceptable offer. Please, no low ballers, I had one guy offer and insult me with a $40.00 offer for the console cover.
Swab posted 01-23-2015 09:45 AM ET (US)     Profile for Swab  Send Email to Swab     
These items are still available!

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.