Pair of used CMC ML-65 jackplates - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  Pair of used CMC ML-65 jackplates

search | FAQ | profile | register | author help

Author Topic:   Pair of used CMC ML-65 jackplates

russellbailey posted 07-08-2014 11:31 AM ET (US)
The prior owner of my 1984 Outrage 25 installed these jackplates in around 2007 when he repowered with 25" counter-rotating Optimax 150s on the 20" transom. I replaced them a few weeks ago with some high rise Hydrodynamics jackplates mainly because I like to tinker with the boat setup and not because there is anything wrong with the CMC units.
If you purchase them both, I'll include a heavy stainless steel bar that the prior owner had between the two engines to use for pulling people on tubes.
They are the one piece style like this.
http://www.cmcmarineproducts.com/userfiles/image/gallery/1469/original/ CMC-65102-manual-jack-plate-500.jpg
Here are the specs from the web page.
One Piece Manual Features:
• Made of 6061 T6 extruded aluminum alloy
• Stainless steel fasteners for maximum strength and durability
• Centrally located adjustment screw for positive alignment
• 5 1/2" Set Back from Transom
• 5" Vertical Adjustment
• Designed to fit standard B.I.A. bolt pattern
$150 each plus shipping from 24014, or $300 for the pair including shipping in the 48 states. Includes stainless mounting hardware. Email me if you are interested - my address is in my profile.
russellbailey posted 07-10-2014 11:00 AM ET (US)
sold

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Pair of used CMC ML-65 jackplates
russellbailey	posted 07-08-2014 11:31 AM ET (US) The prior owner of my 1984 Outrage 25 installed these jackplates in around 2007 when he repowered with 25" counter-rotating Optimax 150s on the 20" transom. I replaced them a few weeks ago with some high rise Hydrodynamics jackplates mainly because I like to tinker with the boat setup and not because there is anything wrong with the CMC units. If you purchase them both, I'll include a heavy stainless steel bar that the prior owner had between the two engines to use for pulling people on tubes. They are the one piece style like this. http://www.cmcmarineproducts.com/userfiles/image/gallery/1469/original/ CMC-65102-manual-jack-plate-500.jpg Here are the specs from the web page. One Piece Manual Features: • Made of 6061 T6 extruded aluminum alloy • Stainless steel fasteners for maximum strength and durability • Centrally located adjustment screw for positive alignment • 5 1/2" Set Back from Transom • 5" Vertical Adjustment • Designed to fit standard B.I.A. bolt pattern $150 each plus shipping from 24014, or $300 for the pair including shipping in the 48 states. Includes stainless mounting hardware. Email me if you are interested - my address is in my profile.
russellbailey	posted 07-10-2014 11:00 AM ET (US) sold