Removing Varnish from Fiberglass - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Removing Varnish from Fiberglass

search | FAQ | profile | register | author help

Author Topic:   Removing Varnish from Fiberglass

Outraged posted 01-09-2001 09:39 AM ET (US)
Does anyone have a product they use for removing old varnish from fiberglass, without harming the fiberglass?

bigz posted 01-09-2001 10:11 AM ET (US)
Derk,
Hmm rough one for a "product" might try your local tool rental center and obtain one them big compressor things with a jacket hammer attached should do the trick use a light touch though --- heh heh ---just kidding just kidding a little winter time humor ---
I believe "Interstrip" made by Interlux will do the trick it seems to clean up just about any paint or varnish on fiberglass.
Hope this helps Tom
Outraged posted 01-10-2001 08:58 AM ET (US)
Tom,Jackhammers & I don`t get along too well. I`d rather take a beating than use one of those for "anything". So I shall use the second suggestion. Actually, I have used Interstrip on several bottom strip jobs at work & you`re right, it works well. Thanks for suggesting it.
Think Spring! Outraged

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Removing Varnish from Fiberglass
Outraged	posted 01-09-2001 09:39 AM ET (US) Does anyone have a product they use for removing old varnish from fiberglass, without harming the fiberglass?
bigz	posted 01-09-2001 10:11 AM ET (US) Derk, Hmm rough one for a "product" might try your local tool rental center and obtain one them big compressor things with a jacket hammer attached should do the trick use a light touch though --- heh heh ---just kidding just kidding a little winter time humor --- I believe "Interstrip" made by Interlux will do the trick it seems to clean up just about any paint or varnish on fiberglass. Hope this helps Tom
Outraged	posted 01-10-2001 08:58 AM ET (US) Tom,Jackhammers & I don`t get along too well. I`d rather take a beating than use one of those for "anything". So I shall use the second suggestion. Actually, I have used Interstrip on several bottom strip jobs at work & you`re right, it works well. Thanks for suggesting it. Think Spring! Outraged