Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  gel coat repair

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   gel coat repair
no glitter posted 02-24-2002 07:42 PM ET (US)   Profile for no glitter   Send Email to no glitter  
Recently purchased 18' Outrage with minor gel coat damage. Any suggestions on repairing these?
OutrageMan posted 02-24-2002 11:50 PM ET (US)     Profile for OutrageMan  Send Email to OutrageMan     
If you would explain where the damage is, how severe, how big an area, etc., I am sure someone could help.

Brian

browning20ga posted 02-25-2002 01:37 PM ET (US)     Profile for browning20ga  Send Email to browning20ga     
no glitter,
Start here, "jimh" wrote his experiences repairing fiberglass damage and gel-coat repair. It's an excellent for the beginner as he was at the time.

http://continuouswave.com/maintenance-logs/epoxy/

Darrell

LKS posted 02-25-2002 02:08 PM ET (US)     Profile for LKS  Send Email to LKS     
Would also suggest that you expand the topic threads to show the last 1 or 2 years of posts. Then search (Control-F with a Netscape browser) for the terms gel coat, gelcoat, fiberglass, etc. This will provide you with a list of previous discussion threads which might provide you with some additional information on making your repairs. Good luck! -- LKS

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.