Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  wiring harness length?

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   wiring harness length?
george nagy posted 03-20-2002 09:39 AM ET (US)   Profile for george nagy   Send Email to george nagy  
I am ordering up all the stuff I need to rerig my 18' outrage. Does anyone know exactly what length the following items are?

1. wiring harness for omc

2. battery cables (batteries are in console)

3. oil res. tank (size)

4. shift cables

I wish to get all the pieces before I unrig the current setup.

lhg posted 03-20-2002 07:15 PM ET (US)     Profile for lhg    
George: I can dig out the shift cable length information for you, unless someone else here knows off-hand.

The Ignition harness of almoat all manufacturers is 20', and will work. No 10' extension is needed.

Your oil tank should be 3 1/2 gallons I would think. That's what my 200's have.

The battery wiring up to the console should be at least #2 AWG. That's what Whaler is using on the (Classic) Montauk.

I want to say that control cables are 16', but don't hold me to that yet. I'll check.
You existing cables may have the length printed on them.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.