ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Running Lights    search | FAQ | profile | register | author help

Author	Topic:   Running Lights
cambowhaler	posted 03-25-2002 04:44 PM ET (US)         Just entered the fray with a restored 13 whaler (early 70s). I need to set-up running lights. Bow light has the two wires coming out. I need: to purchase a stern light, schemtic for wiring and find out how to run the wire from the bow. thanks
whalerron	posted 03-26-2002 12:15 AM ET (US)             If you show all available posts to this forum and search for lights, you should get some good threads on how others have dealt with this issue. In a nutshell, if there are no wires embedded in the hull up to the bow light, most people run the wires behind the rubrail from the stern wiring block up to the bow and to the bow light.
lhg	posted 03-26-2002 12:59 AM ET (US)          If your Whaler has the old style white rubrail, and the 3 in-hull wires have gone bad, BW recommend running the wires under the outside lip of the hull, taped in place with continuous white tape. They won't show, but holes have to be drilled to get them to outside of hull, and them back up to bow light.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion