Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Montauk fuel line access

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Montauk fuel line access
adaco posted 09-18-2002 10:05 PM ET (US)   Profile for adaco   Send Email to adaco  
Can someone describe the nature of the factory fuel line access hole into the centerline tunnel on a Montauk? Is it moulded into the hull like the bilge area hole or cut out and capped with the small screwed-on flange? I need this info to decide how best to cut access to the centerline tunnelon my "Montauk" conversion: the alternative being a through hull fitting as per ratherwhalering's article.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.