Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Use of Morse Control

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Use of Morse Control
Wayneman posted 10-12-2002 03:36 PM ET (US)   Profile for Wayneman   Send Email to Wayneman  
Greetings. I have aquired an old Evinrude 60 for my 17 ftr. How hard would it be to use an old Morse control instead of the usual controls? Is it a major hassle and not worth the hastle? The Morse control looks so much
better. Thx!
crosley95 posted 10-12-2002 05:07 PM ET (US)     Profile for crosley95  Send Email to crosley95     

should be no problem at all. the morse mt3 is universal. i'm using one on my sakonnet with a suzuki dt90. there is some internal adjustments to be made (push/pull) for the cables.

best place i found for a new control was at

$219 plus shipping i think.


Wayneman posted 10-13-2002 12:54 PM ET (US)     Profile for Wayneman  Send Email to Wayneman     
Crosley; that's great. Thank you. I shall look into it. Right now, I also have a problem with a shortage of cables. I figure
it will be snowing by the time this retrofit is done. I'll still go out.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.