Moderated Discussion Areas
ContinuousWave: Whaler Repairs/Mods
Hinging an RPS
|Author||Topic: Hinging an RPS|
posted 10-14-2002 08:47 AM ET (US)
Does anyone have a link or directions on how to hinge the RPS on a Montauk? Thanks for any replies.
posted 10-14-2002 10:02 AM ET (US)
I hinged mine last summer. I'd be happy to send you jpg's but you don't seem to have an email address.
posted 10-14-2002 10:24 AM ET (US)
Sorry 'bout that, has it in there, but forgot to check the box.
posted 10-14-2002 10:41 AM ET (US)
Could I have some pics too?
Red sky at night. . .
posted 10-14-2002 11:49 AM ET (US)
I would appreciate those pictures also.
posted 10-14-2002 11:14 PM ET (US)
Dave;Please send me pics also.
posted 10-15-2002 12:47 PM ET (US)
posted 10-15-2002 04:14 PM ET (US)
posted 10-16-2002 06:45 PM ET (US)
I think I've set pictures to all who have asked. If not, let me know.
Thank guys for all the compliments. The idea however was not mine. Someone else, who's name escapes me, suggested hinging the seat about a year ago. It really is a great idea.
posted 10-16-2002 07:21 PM ET (US)
JimH should put your pix in the reference section so others might benefit, as we did. Thanks again.
posted 10-26-2002 07:07 PM ET (US)
If not too much trouble, could you foward joegs to : firstname.lastname@example.org,
posted 10-26-2002 07:09 PM ET (US)
If not too much trouble, could you foward jpgs to : email@example.com,
sorry for spelling error
posted 10-26-2002 10:15 PM ET (US)
send them to firstname.lastname@example.org
I would love to see them as I'm making a console over the winter.
posted 10-29-2002 12:18 PM ET (US)
I'd like to see the pic's also. Would make filling up the Pate tank a bit easier. Send to email@example.com
posted 10-29-2002 04:17 PM ET (US)
Dave- I still have the copy you sent me, I'll ask Jim to post it in the reference article.
posted 10-29-2002 10:45 PM ET (US)
I've already sent the pics to Jim.
Jim, I hope you can add them soon, I think I've sent out about 20 emails of the pic's. Thanks again for all the compliments. I wish my boat looked as good as the hinges:)
BTW, the hinges are a Stanley product. Sorry I don't have the product number. It's really a simple job. You will need to add pipe supports to the stainless bars under the seat to keep them in position when the seat is raised.
posted 10-08-2007 05:17 PM ET (US)
Jim, are these pics posted somewhere, I could not locate them in the ref section.
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.