ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Windshield Wiper Sweep    search | FAQ | profile | register | author help

Author	Topic:   Windshield Wiper Sweep
gmcclurg	posted 11-21-2002 09:20 AM ET (US)         The windshield wipers on my 28 Conquest sweep too far and hit the alum frame. Is there a way to adjust the sweep?
flaglerdave	posted 11-21-2002 01:05 PM ET (US)             I have worked with many types of marine wiper motors on sea rays and whalers and they have always been pre-set from wiper vendor. BUT I would call whaler and ask a customer service rep. to verify part.386-423-0057.
Dick	posted 11-21-2002 02:03 PM ET (US)             Depending on the brand of wiper motor used you can pull the cover plate and adjust the sweep. If I remember correctly they are available so you can set some from 45 to 110 degree sweep others 80 to 110. The AFI MRV series have the most adjustment.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion