Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  running wire in a Katama

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   running wire in a Katama
Vincent Bertone posted 03-03-2003 02:15 AM ET (US)   Profile for Vincent Bertone   Send Email to Vincent Bertone  
My wires that tun from the bus terminal in the back to the bow light have corroded. I tried to run a new wire through but to no avail it seems like its caught. Is the wire accesible for me to runa new wire or is it encapsuled in fiberglass? Thanks for your help
jimh posted 03-03-2003 08:05 AM ET (US)     Profile for jimh  Send Email to jimh     

This is a frequently asked question.

Vincent Bertone posted 03-05-2003 10:13 PM ET (US)     Profile for Vincent Bertone  Send Email to Vincent Bertone     
thanks for your help now I just have to remove the rub rail and run the wire.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.