Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  placement of wood in the hull

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   placement of wood in the hull
onoitskd posted 04-20-2003 07:06 PM ET (US)   Profile for onoitskd   Send Email to onoitskd  
In the past I had found an image on this website that showed the placement of wood in between the hulls for attachment points. I have lost the measurements for replacing my console brace on the floor. Can anyone help?
JBCornwell posted 04-20-2003 08:41 PM ET (US)     Profile for JBCornwell  Send Email to JBCornwell     
Howdy.

Go to the reference section and look up your hull.

There is probably a downloadable diagram there.

Red sky at night. . .
JB

HAPPYJIM posted 04-20-2003 08:54 PM ET (US)     Profile for HAPPYJIM  Send Email to HAPPYJIM     
I looked for a embedded wood diagram for a 21 Outrage but can't seem to find any info on it in the Reference section. Any help?

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.