15 seat rails - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  15 seat rails

search | FAQ | profile | register | author help

Author Topic:   15 seat rails

skred posted 08-14-2003 02:09 PM ET (US)
Although I inquired about this in a response to another post, I'm wondering if anyone may have a source (besides CMI) for the wraparound seat rails or materials to create a replacement set for my 15 CC. I have the front half of the side rails (about 2 feet), and want to re-create or purchase either the entire side/seat rail assembly, parts, or the necessary stock to do it myself.
jameso posted 08-14-2003 02:30 PM ET (US)
Skredo,
Doesn't your CC have swivel seats? I have a complete sport interior for a 15 with the seat back rail.
Jim Armstrong
skred posted 08-14-2003 02:53 PM ET (US)
Jameso!
Mine had swivel pedestals, but I took 'em out to restore the thwart seat, etc. Although I already built the risers and the main thwart seat, I've only spent about $60.00 on it. I'd LOVE to have the seat, rails, etc. if you want to part with 'em. If you have any interest in the pedestal seats I removed, they're in good shape, and I think they're Whaler-supplied (not sure). I could send pics... If the interior package is reasonable enough, I'd buy it all and turn around and sell the console and front seat, and keep the thwart seat and rails. My present thwart seat would then become the storage box attached to the the seatback.
Let's talk!
Chris posted 08-16-2003 10:04 PM ET (US)
SKRED....How come you removed the pedestal seats from your CC?
skred posted 08-18-2003 08:00 AM ET (US)
I removed the pedestals because they were not original on the 15 center console model, and also they were just high enouch to make steering uncomfortable, and the fellow who had it done placed them closer to the console than was comfortable for my 6' - 240 lb. self. I suppose I could have cut the pedestals down, but I prefer the original, classic look. If you're interested in the pedestalss (and they're very nice) I can email you some photos both installed and uninstalled closeups.
skred posted 08-18-2003 08:19 AM ET (US)
Jameso!,
Your e-mail address as listed doesn't seem to work. I'll try again, but the msg returned says "not our customer."
???
jameso posted 08-18-2003 08:42 AM ET (US)
Skred,
james-o@att.net.
skred posted 08-18-2003 03:58 PM ET (US)
James-o,
Duuhhh,... that an "o" not a zero, isn't it...? Works a lot better now...
I forgot where you're located... I'm in WI...
SkipperRick posted 08-19-2003 11:17 AM ET (US)
I am also interested in the console for the 15. I just got a 13 sport with a console in really bad shape. I'd like to replace it with a 15 console. I'm also looking for the wrap around rails for a 13 Super Sport. I'd bet that a seat back would be more comfortable.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: 15 seat rails
skred	posted 08-14-2003 02:09 PM ET (US) Although I inquired about this in a response to another post, I'm wondering if anyone may have a source (besides CMI) for the wraparound seat rails or materials to create a replacement set for my 15 CC. I have the front half of the side rails (about 2 feet), and want to re-create or purchase either the entire side/seat rail assembly, parts, or the necessary stock to do it myself.
jameso	posted 08-14-2003 02:30 PM ET (US) Skredo, Doesn't your CC have swivel seats? I have a complete sport interior for a 15 with the seat back rail. Jim Armstrong
skred	posted 08-14-2003 02:53 PM ET (US) Jameso! Mine had swivel pedestals, but I took 'em out to restore the thwart seat, etc. Although I already built the risers and the main thwart seat, I've only spent about $60.00 on it. I'd LOVE to have the seat, rails, etc. if you want to part with 'em. If you have any interest in the pedestal seats I removed, they're in good shape, and I think they're Whaler-supplied (not sure). I could send pics... If the interior package is reasonable enough, I'd buy it all and turn around and sell the console and front seat, and keep the thwart seat and rails. My present thwart seat would then become the storage box attached to the the seatback. Let's talk!
Chris	posted 08-16-2003 10:04 PM ET (US) SKRED....How come you removed the pedestal seats from your CC?
skred	posted 08-18-2003 08:00 AM ET (US) I removed the pedestals because they were not original on the 15 center console model, and also they were just high enouch to make steering uncomfortable, and the fellow who had it done placed them closer to the console than was comfortable for my 6' - 240 lb. self. I suppose I could have cut the pedestals down, but I prefer the original, classic look. If you're interested in the pedestalss (and they're very nice) I can email you some photos both installed and uninstalled closeups.
skred	posted 08-18-2003 08:19 AM ET (US) Jameso!, Your e-mail address as listed doesn't seem to work. I'll try again, but the msg returned says "not our customer." ???
jameso	posted 08-18-2003 08:42 AM ET (US) Skred, james-o@att.net.
skred	posted 08-18-2003 03:58 PM ET (US) James-o, Duuhhh,... that an "o" not a zero, isn't it...? Works a lot better now... I forgot where you're located... I'm in WI...
SkipperRick	posted 08-19-2003 11:17 AM ET (US) I am also interested in the console for the 15. I just got a 13 sport with a console in really bad shape. I'd like to replace it with a 15 console. I'm also looking for the wrap around rails for a 13 Super Sport. I'd bet that a seat back would be more comfortable.