New Steering and Controls for 67 Eastport - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  New Steering and Controls for 67 Eastport

search | FAQ | profile | register | author help

Author Topic:   New Steering and Controls for 67 Eastport

rogerme posted 11-13-2003 11:43 AM ET (US)

I am finally going to install a 97 Johnson 60 on my 67 Eastport that has original steering and original wood console with Morse single lever control. Does anyone know the cable lengths for this setup? I would like to use the NFB helm.

DanT posted 11-13-2003 05:14 PM ET (US)
I have a 1966 Eastport and used 15 foot control cables and a 17 foot Teleflex steering cable connected to a NFB helm. Although this made for a neat installation I would consider these lengths to be the minimum needed. If I had to do it again I would probably go one foot longer for all cables.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: New Steering and Controls for 67 Eastport
rogerme	posted 11-13-2003 11:43 AM ET (US) I am finally going to install a 97 Johnson 60 on my 67 Eastport that has original steering and original wood console with Morse single lever control. Does anyone know the cable lengths for this setup? I would like to use the NFB helm.
DanT	posted 11-13-2003 05:14 PM ET (US) I have a 1966 Eastport and used 15 foot control cables and a 17 foot Teleflex steering cable connected to a NFB helm. Although this made for a neat installation I would consider these lengths to be the minimum needed. If I had to do it again I would probably go one foot longer for all cables.