ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Nauset Interior    search | FAQ | profile | register | author help

Author	Topic:   Nauset Interior
NausetBoy	posted 12-23-2003 06:46 PM ET (US)         The blue interior of my Nauset is oxidized. Not extreme but enough to notice. Should I buff with a ligh abrasive? What products do yall recomend? Thanks!!! Sonny
BugsyG	posted 12-23-2003 06:58 PM ET (US)             Hi Sonny, On our Carver we primarily use Collonite's Fleetwood Wax; the cleaner and the polish. It is very expensive, but its worth it. Put 3 coats on and its good for a long time if you wash it frequently. Please check West Marine or Boat US to see if they have it. Thanks Sonny JAZZ
smirkless	posted 12-26-2003 11:25 AM ET (US)             Try using Penetrol on the glass first. This will take the oxidation off easily. Then use your favorite wax over that in an hour or so. Penetrol is inexpensive and easy to use. It is available at hardware and marine stores. Enjoy.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion