ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Paint removal from wood RPS    search | FAQ | profile | register | author help

Author	Topic:   Paint removal from wood RPS
greyg8r	posted 01-24-2004 03:44 PM ET (US)      I am restoring the mahogany RPS back on my Katama. I thought I would have to replace the whole seat back, but I was able to replace just a few boards that I was able to purchase on Ebay for less than $20 that were already planed. Someone, obviously without taste or a conscience (in my humble opinion), painted the original, beautiful mahogany with white enamel! I tried liquid paint stripper, but it had zero effect. Any suggestions? Thanks Richard
JBCornwell	posted 01-24-2004 08:38 PM ET (US)             I don't think anything but sanding will do it right, Richard. Red sky at night. . . JB
Tom W Clark	posted 01-25-2004 12:56 AM ET (US)             Richard, Jasco's "Premium Paint & Epoxy Remover" is your best bet. Try It, you'll like it.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion