Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Line-X Keel Guard report

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Line-X Keel Guard report
alkar posted 02-21-2004 01:19 PM ET (US)   Profile for alkar   Send Email to alkar  
Early last summer I promised to provide periodic reports on the performance of my Line-X components. I have nothing but good news to share.

My custon-shaped Line-X keel-guard is performing perfectly. No measurable loss in performance, perfect adhesion, and complete protection. The Line-X cost less that the alternatives and, in my opinion, looks more sanitary and provides better protection. It also allows for easy custom shaping, so it can be wider and thicker in the area that is subject to the most stress (and contact) during beaching. (My guard starts as a narrow strip near the bow, but the strip widens out to about 7+" at the "sticking point" about 7' aft of the bow.)

I'm similarly happy with the performance of the Line-X on the decks, hatches, compartments, and dash panels.

The most challenging test will be the summer in the San Juan islands, as we often have to beach on a fairly rough beach to off-load people, groceries, and other supplies. I'll report again in the fall.

JayR posted 02-21-2004 06:26 PM ET (US)     Profile for JayR  Send Email to JayR     
I've anxiously awaited your report. Thank you!

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.