ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Shifter Cable removal    search | FAQ | profile | register | author help

Author	Topic:   Shifter Cable removal
DannyT	posted 01-01-2005 10:14 PM ET (US)         I am in the process of taking the exisiting center console out of my 1973 17' whaler. It has a OMC throttle and shifter mounted on the side of the console. To remove the console I need to remove the cables from either the motor or the shifter control at the console. I am thinking it would be easier to remove them at the motor. Any advice? Thanks
newportguy	posted 01-02-2005 09:38 AM ET (US)             Danny, The easiest way is to let the cables go at the motor end. But you have to pull through the tunnel. This may not be bad though, as it should be fairly easy. At the same time the control box is a simple removal as well. Just a little bit more tedious. Larry

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion