ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Montauk cooler cleats    search | FAQ | profile | register | author help

Author	Topic:   Montauk cooler cleats
duckman	posted 11-28-2006 03:04 PM ET (US)         Need some help. I am restoring a 1987 Montauk and need to know if the cooler cleats used two separate bungee cords for each side (one for each hole)or did they use one cord going through both holes with a hook in the middle.Thanks in advance for the help.
Joe Kriz	posted 11-28-2006 03:49 PM ET (US)             duckman, There is only one cord on each side that goes through both holes in the cleat. This cord is then hooked to the one cooler hook that is attached to each side of the cooler. These cooler hooks can be purchased from Boston Whaler. See Photos here: http://www.whalercentral.com/viewpage.php?page_id=69
Estero	posted 11-28-2006 03:49 PM ET (US)             One cord with a hook in the middle.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion