Retrofitting Teak Gunwales - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Retrofitting Teak Gunwales

search | FAQ | profile | register | author help

Author Topic:   Retrofitting Teak Gunwales

standard 17 posted 12-30-2006 01:16 PM ET (US)
I have an 1987 Outrage 20 with fiberglass gunwale caps that I'd like to replace with teak. [Seeks a source for] drawings for these components. I would have a local millwork shop fabricate them. I could remove the fiberglass and generate drawings myself but would rather not pull it all apart. Thanks.
Ted

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Retrofitting Teak Gunwales
standard 17	posted 12-30-2006 01:16 PM ET (US) I have an 1987 Outrage 20 with fiberglass gunwale caps that I'd like to replace with teak. [Seeks a source for] drawings for these components. I would have a local millwork shop fabricate them. I could remove the fiberglass and generate drawings myself but would rather not pull it all apart. Thanks. Ted