Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Z legs

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Z legs
Tom C posted 02-12-2007 12:12 PM ET (US)   Profile for Tom C   Send Email to Tom C  
My Montauk has gray colored Z legs for the RPS. They are some what discolored and I wonder what product might clean them. I've tried scrub pads,etc without much luck. Can they be painted, if yes, what kind of paint and preparation.
andygere posted 02-12-2007 12:37 PM ET (US)     Profile for andygere  Send Email to andygere     
I have had good luck using a product called Penetrol. Wipe the legs down, let it soak in for a while, then buff with a clean rag. This was suggested by Tom W. Clark, and it works!

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.