ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Repair trial    search | FAQ | profile | register | author help

Author

Topic:   Repair trial

Expo2

posted 03-20-2007 07:14 PM ET (US)         I am restoring a 1976 13'. Luckily, the repairs that were done have been easily un-done. I have ground down fiberglass patch work to reveal voids where foam should be. My idea was to grind to fresh foam, wet the surface and apply "gorilla glue" I did this and as expected the glue expanded 3x its applied ammount and filled the void. Before I start the epoxy/ fiberglass repair process, I am looking to the experts for opinions on what I have done so far. Thanks in advance, I look forward to the replies.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion