ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Shepherd Crook fasteners    search | FAQ | profile | register | author help

Author

Topic:   Shepherd Crook fasteners

PFSQUAN

posted 04-12-2007 08:41 AM ET (US)         The two fasteners in the T fitting designed to secure the three pieces of stainless-steel tube, which form the shepherd crook on my 1985 Montauk are spinning free. One fastener is on the top, the other screws in from the bottom. The fasteners are not securing anything at this point and the loose crook rattles in a seaway. I am not sure if these fasteners are plain screws or machine screws, but is there a trick to remove them? Thanks. Peter

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion