ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Source for foam for 13 footer    search | FAQ | profile | register | author help

Author	Topic:   Source for foam for 13 footer
adirondacker	posted 05-30-2007 05:33 PM ET (US)         I have a 13 footer that I am restoring, the oter skin was abused bad in spots, and some foam areas need to be replaced. The "Whaler Way" for repairs assumes you have a small divit in the foam, I have a few holes and it would be pricy to fill with resin.... Any sources are appreciated. Eric
contender	posted 05-30-2007 09:25 PM ET (US)             Find a marine supplier/fiberglass repair shop and purchase some 2 pound foam, comes in quarts, two part mix, and you mix it in a small cup and pour it in the holes. Sand it to shape and glass over it. make sure you cover(protect) the area good this stuff is messy and wear thin gloves to work with...good luck

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion