ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Tashmoo front bolster    search | FAQ | profile | register | author help

Author	Topic:   Tashmoo front bolster
lasersailor	posted 08-05-2007 01:21 PM ET (US)         The front bolster on my tashmoo has a zip on panel that I think is supposed to attach to the deck somehow so that the cushion can be zipped in or out of the boat. I was wondering if any other tashmoo owners could enlighten me as to how this is attached to the deck, since it currently isn't on my boat. Thanks, Jeff
PFSQUAN	posted 08-07-2007 09:17 AM ET (US)             My Tashmoo had a 4 ft. long x 6 inch round bolster in the bow. It was original and the vinyl material with a cackle finish matched the stern seat and the four other cushions that sat forward of the console. The bow cushion featured a bungee cord inside with stainless steel hooks that secured to receivers port and starboard. The bow cushions were secured in place with snap fasteners. Peter
lasersailor	posted 08-07-2007 01:28 PM ET (US)             Thanks. Maybe I am missing the bungee and the hooks, the rest of my cushion set is as you describe.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion