ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Moeller Aluminum Fitting for Moeller tanks    search | FAQ | profile | register | author help

Author	Topic:   Moeller Aluminum Fitting for Moeller tanks
walf	posted 09-07-2007 02:31 PM ET (US)         I bought a Moeller tank. Moeller has an aluminum fitting and advises against using a brass fitting. I can not find a source for a brass fitting. Moeller says a stainless steel fitting will work. I have found a source for the steel fitting. It is buyfittingsonline.com. They have a 1/4-inch NPT fitting with a 3/8-inch barb which should fit the aluminum fitting on the Moeller tank.
jjandpop	posted 09-07-2007 04:52 PM ET (US)             If you are looking for an aluminum fitting with the anti-siphon feature, I can supply them. The come 1/4-inch IPS with either 1/4- or 3/8-inch hose barb. My email address is jjandpop1@bellsouth.net. Jim

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion