1987 Outrage 18 Rod Holders - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  1987 Outrage 18 Rod Holders

search | FAQ | profile | register | author help

Author Topic:   1987 Outrage 18 Rod Holders

bhmiller3 posted 03-06-2008 08:25 PM ET (US)
I apologize, I know I saw the drawings once, but can't find them again.
I am in the process - nearly completed - of restoring my '87 Outrage 18. To do so I need to make new rod holders that were on the inside of the hull. There were two on each side mounted to the inside of the hull via alumnimum brackets. To get an idea of what they look like, you can see them in the picture at http://continuouswave.com/whaler/cetacea/cetaceaPage16.html labeled Cruz Control - at the bottom right of the photo.
Somewhere on the web I saw blue print drawings of the originals.
Can anyone point me to them? Or send me drawings they may have?
It would be greatly appreciated - and thank you all.
Bruce
Casco Bay Outrage posted 03-06-2008 10:20 PM ET (US)
If you are talking about the two rod holders mounted on the gunnel, I believe these are LEE 30 degree rod holders in stainless steel.
See http://www.discountmarinesupplies.com/ Rod_Holders_Lees-LEES_FLUSH_MOUNT_ROD_HOLDERS_MEDIUM_SIZE.html
Someone backstop me on this.
CBO
Outnaboat posted 03-07-2008 02:07 AM ET (US)
I think you're referring to the teak rod holders? I had a couple of sets made last year for my 86 Outrage, and the guy who made them did an outstanding job. If you want his email let me know.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: 1987 Outrage 18 Rod Holders
bhmiller3	posted 03-06-2008 08:25 PM ET (US) I apologize, I know I saw the drawings once, but can't find them again. I am in the process - nearly completed - of restoring my '87 Outrage 18. To do so I need to make new rod holders that were on the inside of the hull. There were two on each side mounted to the inside of the hull via alumnimum brackets. To get an idea of what they look like, you can see them in the picture at http://continuouswave.com/whaler/cetacea/cetaceaPage16.html labeled Cruz Control - at the bottom right of the photo. Somewhere on the web I saw blue print drawings of the originals. Can anyone point me to them? Or send me drawings they may have? It would be greatly appreciated - and thank you all. Bruce
Casco Bay Outrage	posted 03-06-2008 10:20 PM ET (US) If you are talking about the two rod holders mounted on the gunnel, I believe these are LEE 30 degree rod holders in stainless steel. See http://www.discountmarinesupplies.com/ Rod_Holders_Lees-LEES_FLUSH_MOUNT_ROD_HOLDERS_MEDIUM_SIZE.html Someone backstop me on this. CBO
Outnaboat	posted 03-07-2008 02:07 AM ET (US) I think you're referring to the teak rod holders? I had a couple of sets made last year for my 86 Outrage, and the guy who made them did an outstanding job. If you want his email let me know.