|
ContinuousWave Whaler Moderated Discussion Areas ContinuousWave: Whaler Repairs/Mods new wood
|
Author | Topic: new wood |
los is 7 |
posted 06-06-2008 09:41 AM ET (US)
I plan on building the interior for my 13 sport from new wood. I have searched for procedures on this and can't find anything for starting from scrath. I would like to stain the wood and don't know what the next step would be. I would like to end with a matte finish, I do not care much for the gloss look. Do I varnish, shoot poly-u, or wax? I'm new to this site so sorry if this question has been posted before. Thanks |
HAPPYJIM |
posted 06-06-2008 09:56 AM ET (US)
here's some good info http://continuouswave.com/whaler/reference/whalerWood.html This subject has been beat to death in past threads. You can do a search and find days of reading on how to do the wood. The hard part is deciding how you want to finish it after reading all the material. |
Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.