ContinuousWave
Whaler
Moderated Discussion Areas
ContinuousWave: Whaler Repairs/Mods
Hardware question on Montauk handrails
search | FAQ |
profile | register | author help
|
|
ContinuousWave Whaler Moderated Discussion Areas
ContinuousWave: Whaler Repairs/Mods
Hardware question on Montauk handrails
|
| Author | Topic: Hardware question on Montauk handrails |
| thunderpaste |
posted 03-21-2009 08:58 PM ET (US)  
Yeah yeah I know I should have bagged and tagged my hardware but I didn't... So I am done compounding, finesse-it, and waxing my gelcoat. It's time to put the handrails back on and I have two different length screws. Which ones go where? |
| Tom W Clark |
posted 03-22-2009 06:19 PM ET (US)
The screws for mounting the rails to the hull should all be the same, #10 x 1" Phillips oval head sheet metal screws. If different lengths were used on your boat, it is easy to figure which go where by using a paper clip that has been straightened out to act as a probe to measure the depth of the screw holes. Measure a few holes and I suspect it will quickly become apparent which length screws go where. |
| thunderpaste |
posted 03-22-2009 07:37 PM ET (US)
Thanks I figured it out. |
| |
Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.