Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Helm Replacement - Advice

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Helm Replacement - Advice
mgeiger posted 03-31-2009 06:15 PM ET (US)   Profile for mgeiger  
I searched - but I have a unique situation.

My helm has been getting sloppier lately. I pulled everything apart. It is time for a replacement helm.

1986 Montauk 17
My helm appears to be the original Teleflex SH5023

The unique part:
The original owner had a new Teleflex SSC6218 cable installed just before I bought the boat 13 months ago(receipt verified). I don't use the boat much so the cable is still like new. No slop in it or at the motor connection. I really don't want to route a new cable either. Now - why the previous owner's mechanic didn't swap out the helm at this time - I don't know. I do know the prior cable was seized.

So I'm looking for a replacement helm, which will allow me to use the SSC6218 cable. An online retailer states that "the SSC6218 fits Teleflex Safe-T, Quick Connect helms, NFB (no feedback) helms".

Based on that - what helm do you guys recommend?

hauptjm posted 03-31-2009 08:06 PM ET (US)     Profile for hauptjm    
Hydraulic!

Kidding aside, the Teleflex should be fine. Verify the compatibility of parts directly with Teleflex. You should be able to do this online via their website.

mgeiger posted 03-31-2009 08:14 PM ET (US)     Profile for mgeiger    
Thanks. I ended up finding what I needed.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.