ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Inspection ports    search | FAQ | profile | register | author help

Author	Topic:   Inspection ports
jhendric	posted 07-22-2011 01:07 PM ET (US)         Guys, Can you help me find a source for the thinner ringed inspection ports for my 84 Whaler? Or conversly can you help me with an effective way of shaving off 1/8 inch from the standard ones so the fit down into the r ecessed spot for them? Thanks in advance.
contender	posted 07-22-2011 03:58 PM ET (US)             Belt sander, turn the ring upside down and screw in a couple of screws on a piece of wood to hold it in place(If this is what you are talking/want to do about)....
Tom W Clark	posted 07-22-2011 06:02 PM ET (US)             Beckson has them, in the original Whaler color: http://www.beckson.com/prydp.html
jhendric	posted 07-22-2011 08:11 PM ET (US)             Yeah the Beckson 6"ers are great...unfortunitly th 8s don't have the thin rims available....I'll try the sander method and see how that works... thanks
Whalrman	posted 07-22-2011 08:35 PM ET (US)             Watch the fingers and eye's!

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic Whalers