Wm.J. Mills CC & RPS Cover 18 Dauntless - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Wm.J. Mills CC & RPS Cover 18 Dauntless

search | FAQ | profile | register | author help

Author Topic:   Wm.J. Mills CC & RPS Cover 18 Dauntless

Matty_Cardin posted 05-24-2014 11:29 PM ET (US)
Hi All, I am/was very excited to receive my center console cover and RPS cover from Wm. J. Mills for my 2001 BW 18' Dauntless - The boat finally made it's way to the slip today and tried on the new covers….To my dismay, the covers seemed to fit poorly or at least not to my liking. It seems like both covers are short and don't stretch all the way to the ground or even at least the black strip near the bottom.
Any one else have a similar experience with fit for the Mills canvas - I was assuming I was getting the best of the best, but I was slightly disappointed to see that they don't cover all the way to the deck or even to the black strip.
Thanks ahead of time!
Matty C
george nagy posted 05-25-2014 01:07 PM ET (US)
I too have had recent difficulty with my new mills console cover way too tight. I even need to remove the wheel in order to use it. I'm hoping that after a summer of use it will stretch enough to leave the wheel on.
george nagy posted 05-25-2014 01:08 PM ET (US)
I too have had recent difficulty with my new mills console cover way too tight. I even need to remove the wheel in order to use it. I'm hoping that after a summer of use it will stretch enough to leave the wheel on.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Wm.J. Mills CC & RPS Cover 18 Dauntless
Matty_Cardin	posted 05-24-2014 11:29 PM ET (US) Hi All, I am/was very excited to receive my center console cover and RPS cover from Wm. J. Mills for my 2001 BW 18' Dauntless - The boat finally made it's way to the slip today and tried on the new covers….To my dismay, the covers seemed to fit poorly or at least not to my liking. It seems like both covers are short and don't stretch all the way to the ground or even at least the black strip near the bottom. Any one else have a similar experience with fit for the Mills canvas - I was assuming I was getting the best of the best, but I was slightly disappointed to see that they don't cover all the way to the deck or even to the black strip. Thanks ahead of time! Matty C
george nagy	posted 05-25-2014 01:07 PM ET (US) I too have had recent difficulty with my new mills console cover way too tight. I even need to remove the wheel in order to use it. I'm hoping that after a summer of use it will stretch enough to leave the wheel on.
george nagy	posted 05-25-2014 01:08 PM ET (US) I too have had recent difficulty with my new mills console cover way too tight. I even need to remove the wheel in order to use it. I'm hoping that after a summer of use it will stretch enough to leave the wheel on.