A cry for help from Norway! - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  A cry for help from Norway!

search | FAQ | profile | register | author help

Author Topic:   A cry for help from Norway!

norviking posted 09-18-2014 03:38 PM ET (US)
I am a Norwegian living in Trondheim, where it is impossible to acquire accessories for old outboard engines, and I am therefore kindly asking help from anyone who would be able to and want to accommodate my request.
The trim/tilt harness of my 1981 85hp Yamaha is broken, except for the wiring from the (remote) switch and the trim motor.
To me the cabling accessory seems like an Evinrude/Johnson type from the same period, with the following wires connected to the relay bracket:
• A three-wire input from the (remote) switch – UP (blue)/DWN (green) and 12V (red)
• 12V (red ) from the battery, and GND (black)
along with the two outputs for the trim motor:
•UP (blue) and DWN (green)
What I need is the cabling harness connected to the relay bracket, along with the bracket and relays.
If anyone has access to such a harness/accessory and would want to help me out, I would gladly pay up-front for the pertinent equipment and transportation to Trondheim, Norway – along with any reasonable remuneration.

Edje posted 09-19-2014 03:10 AM ET (US)
I am Yamaha dealer in the Netherlands.
It looks like these parts are available new.
Your Yamaha dealer can order them.
norviking posted 09-19-2014 06:14 AM ET (US)
Thanks a lot for your prompt response!
However, my trim/tilt harness is obviously not original – it looks more like an Evinrude/Jonhnson type from the same period (1980-86?).
The label on the bracket reads: 176584 03-F-X MEXICO.
saumon posted 09-19-2014 06:19 PM ET (US)
You're right, that number (BRP-0176584) list as "Relay & Cable assembly, Tilt and Trim" for around $100 and is available through any Evinrude/Johnson dealer. Order online and they'll ship to Norway.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: A cry for help from Norway!
norviking	posted 09-18-2014 03:38 PM ET (US) I am a Norwegian living in Trondheim, where it is impossible to acquire accessories for old outboard engines, and I am therefore kindly asking help from anyone who would be able to and want to accommodate my request. The trim/tilt harness of my 1981 85hp Yamaha is broken, except for the wiring from the (remote) switch and the trim motor. To me the cabling accessory seems like an Evinrude/Johnson type from the same period, with the following wires connected to the relay bracket: • A three-wire input from the (remote) switch – UP (blue)/DWN (green) and 12V (red) • 12V (red ) from the battery, and GND (black) along with the two outputs for the trim motor: •UP (blue) and DWN (green) What I need is the cabling harness connected to the relay bracket, along with the bracket and relays. If anyone has access to such a harness/accessory and would want to help me out, I would gladly pay up-front for the pertinent equipment and transportation to Trondheim, Norway – along with any reasonable remuneration.
Edje	posted 09-19-2014 03:10 AM ET (US) I am Yamaha dealer in the Netherlands. It looks like these parts are available new. Your Yamaha dealer can order them.
norviking	posted 09-19-2014 06:14 AM ET (US) Thanks a lot for your prompt response! However, my trim/tilt harness is obviously not original – it looks more like an Evinrude/Jonhnson type from the same period (1980-86?). The label on the bracket reads: 176584 03-F-X MEXICO.
saumon	posted 09-19-2014 06:19 PM ET (US) You're right, that number (BRP-0176584) list as "Relay & Cable assembly, Tilt and Trim" for around $100 and is available through any Evinrude/Johnson dealer. Order online and they'll ship to Norway.