Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  150 MONTAUK: Removing Bait Tank

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   150 MONTAUK: Removing Bait Tank
RPM22 posted 12-29-2014 05:44 PM ET (US)   Profile for RPM22   Send Email to RPM22  
We recently purchased a 2008 Montauk 150 which came with the bait tank just forward of the engine. We're going to be using this mostly as a tender to our 36-foot Uniflite, so we are thinking of removing this bait tank and filling the holes left. Has anyone done this, and if so, how many holes are left to fill?
jimh posted 12-30-2014 09:30 AM ET (US)     Profile for jimh  Send Email to jimh     
Give Boston Whaler customer service a call. They will give you expert knowledge on this topic. When you call Boston Whaler customer service, you don't get the new kid who's been on the job for a week. You get very experienced experts who know the Boston Whaler product inside and out. They'll be pleased to help you.
Ferdinando posted 01-02-2015 08:27 AM ET (US)     Profile for Ferdinando  Send Email to Ferdinando     
Wish I could follow you lead, I have a 2008 190 which comes with that bait well which I absolutely hate due to the space it takes up. My removal would require fiberglass reconstruction and building out the deck towards the stern. The newer 190's don't have this problem as the bait well is removable and the deck is built all the way back.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.