ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Aftermarket Bow Rail    search | FAQ | profile | register | author help

Author

Topic:   Aftermarket Bow Rail

Airedale1

posted 05-03-2015 06:10 PM ET (US)      I have 88 Montauk 17. I bought an aftermarket bow rail for it from Specialty Marine. The directions, it say to drill two 9/64" holes for the stanchion support which is behind the bow light and forward of the Norman pin. When I did that I hit metal and when I was finally able to drill through it I could not get the supplied screws to screw down. Any suggestions would be greatly appreciated. Am I doing something wrong?

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Small Boat ElectricalContinuousWave: Trips and Rendezvous