Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Trolling Motor Mounting Location Suggestions

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Trolling Motor Mounting Location Suggestions
jasiu posted 06-03-2015 01:54 PM ET (US)   Profile for jasiu   Send Email to jasiu  
I've got a 2006 150 Montauk and I wanted to add a Motor Guide iX5 trolling motor to the fore port area of the boat. Unfortunately, it seems like the bow rails will interfere with the operation without some rail modification - not entirely sure of this. I'm not to excited about modifying bow rails.

I'm sure someone out there has successfully mounted a trolling motor in this area and may have some pics to share. Others have suggested mounting the trolling motor to the stern or outboard motor itself.

Would welcome some direction and commentary.

fishgutz posted 06-05-2015 09:18 AM ET (US)     Profile for fishgutz  Send Email to fishgutz     
Ok this is ugly but functional. I think my railing is lower than yours. I don't use a trolling motor much but this works fine when I do. I usually don't run with just the block on the railing. I only put it on when I use the trolling motor. I only wish there was a quicker way to bolt on the block. This doesn't take long but I wish it was easier and faster.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.