Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  RAGE 14 Gas Springs for Hatch

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   RAGE 14 Gas Springs for Hatch
jbrobinson33 posted 07-25-2015 04:08 PM ET (US)   Profile for jbrobinson33   Send Email to jbrobinson33  
I'm finally getting around to fixing the rear engine hatch on my 1994 Rage 14. It did not have any gas springs on it when I bought it so I don't know what length and strength of spring to buy. My Rage 15 takes a 20-inch and 80-lbs gas spring, but those are too long for the Rage 14. And a 15-inch spring is too short. I could just keep throwing darts at it but I thought I'd ask you guys first. Thanks.
simonbarsinister posted 09-13-2015 11:17 PM ET (US)     Profile for simonbarsinister  Send Email to simonbarsinister     
I will look at mine tomorrow, and see if I can get a number for you
wezie posted 09-14-2015 09:53 PM ET (US)     Profile for wezie    
[TaylorMade Products] offers various lifters in steel and stainless steel, in various lengths and strengths, and they also offer the mounting hardware; sold at West Marine and other [TaylorMade Products] dealers. Also auto parts stores [sell gas shocks].

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.