Moderated Discussion Areas
  ContinuousWave: Whaler Performance
  Prop Calcium

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Prop Calcium
Flipper posted 09-13-2001 07:38 PM ET (US)   Profile for Flipper   Send Email to Flipper  
I have a polished stainless prop
on my boat, which stays in the water
most of the summer. My problem is ;
my prop has slowly acquired a new
finish: matte white! What is the quickest
way to get this stubborn finish off without
destroying the prop/environment?
Dick posted 09-13-2001 08:06 PM ET (US)     Profile for Dick  Send Email to Dick     
Any good metal polish should work. I like Flitz best. Mothers stainless steel polish works good as well.
lhg posted 09-13-2001 10:34 PM ET (US)     Profile for lhg    
LimeAway bathroom cleaner will do the trick quickly.
Ed Stone posted 09-14-2001 09:29 PM ET (US)     Profile for Ed Stone  Send Email to Ed Stone     
We went camping a while back and I left
the Whaler in the water for a couple of
days.I should have tilted the motors.
My props had done the same thing.
Polish did very little to break the scale.
I had remebered LHG talking about cleaning
the foot of his outboards using limeaway.
Limeaway worked like a champ!
Good luck!
Ed Stone

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.