Toy Too 27' Walk Around - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Performance
  Toy Too 27' Walk Around

search | FAQ | profile | register | author help

Author Topic:   Toy Too 27' Walk Around

sblack posted 05-27-2008 06:37 PM ET (US)
Tom,
This is Steve Black, again from San Diego. I will have all necessary parts by Friday to install, twin I Command Gauges, new BRP Dual Binnacle, cables and Engine Tie Bar on my 1991, 27' Walk Around with 250 E Techs. I am also going with Paul's recommendation of twin Rev. 4, 14.62 x 17, four blade props. My last question is engine mounting height. I know, everyone has said leave them where they currently are, the 3rd mounting hole from the top. The reason I am revisiting this, is because last October, I flew to Cape Cod to look at a 1992, 27 Walk Around, with twin Johson 225's. The boat is still for sale, and when I enlarged one of the photos last night, the motors were mounted on the bottom, 4th mounting hole. I drove the boat and it seemed to ride fine when I was there, it was just too far gone to consider buying.
I know, Billy Owens, who owns, Toy Too, just put twin 300HP HPDI's on his 1992 27' Walk Around. I spoke with him once, but cannot find his contact info. I would like to ask him what mounting hole his new motors are on. The photos of the new motors on Whaler Central, look pretty darn high. If I do not get in contact with him, I will stay where I am and see what happens on the next test run. if you happen to know how to contact Billy, please give him my Cell-619-666-3858, or post his response please.
I'm almost there, and the Albacore/Bluefin are some 240 miles away, heading North......
Thanks, Steve
sblack posted 05-28-2008 08:03 PM ET (US)
Somehow Billy got this message, and called today. Thanks to anyone who passed it onto him.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Toy Too 27' Walk Around
sblack	posted 05-27-2008 06:37 PM ET (US) Tom, This is Steve Black, again from San Diego. I will have all necessary parts by Friday to install, twin I Command Gauges, new BRP Dual Binnacle, cables and Engine Tie Bar on my 1991, 27' Walk Around with 250 E Techs. I am also going with Paul's recommendation of twin Rev. 4, 14.62 x 17, four blade props. My last question is engine mounting height. I know, everyone has said leave them where they currently are, the 3rd mounting hole from the top. The reason I am revisiting this, is because last October, I flew to Cape Cod to look at a 1992, 27 Walk Around, with twin Johson 225's. The boat is still for sale, and when I enlarged one of the photos last night, the motors were mounted on the bottom, 4th mounting hole. I drove the boat and it seemed to ride fine when I was there, it was just too far gone to consider buying. I know, Billy Owens, who owns, Toy Too, just put twin 300HP HPDI's on his 1992 27' Walk Around. I spoke with him once, but cannot find his contact info. I would like to ask him what mounting hole his new motors are on. The photos of the new motors on Whaler Central, look pretty darn high. If I do not get in contact with him, I will stay where I am and see what happens on the next test run. if you happen to know how to contact Billy, please give him my Cell-619-666-3858, or post his response please. I'm almost there, and the Albacore/Bluefin are some 240 miles away, heading North...... Thanks, Steve
sblack	posted 05-28-2008 08:03 PM ET (US) Somehow Billy got this message, and called today. Thanks to anyone who passed it onto him.