SOLORA Four-Blade Propeller for TENDER 11 - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Performance
  SOLORA Four-Blade Propeller for TENDER 11

search | FAQ | profile | register | author help

Author Topic:   SOLORA Four-Blade Propeller for TENDER 11

chappy posted 08-24-2014 11:33 AM ET (US)
My 1995 TENDER 11 was just refitted [with] a [TOHATSU] 20-HP four-stroke-power-cycle outboard engine. Since I raised the motor 0.5-inch [the top speed is now guessed to be] 29-MPH, and prior to raising was measured on a GPS receiver to be 27-MPH. I have not changed the factory-supplied propeller, which is a 10-pitch three-blade aluminum propeller. With my 200-lbs carcass and with my wife aboard (who sits in front of me, midship) [the TENDER 11] runs 21-MPH. Does anyone have experience with SOLORA four-blade? Have done lots of propeller changing on other boats with varied success. Thanx, chappy
contender posted 08-25-2014 09:11 PM ET (US)
Someone gave me a 4 blade stainless prop, no name, no numbers of any kind, took it to a prop shop and it measures 10x10, I have been running it seems to be better that the alum one I had.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: SOLORA Four-Blade Propeller for TENDER 11
chappy	posted 08-24-2014 11:33 AM ET (US) My 1995 TENDER 11 was just refitted [with] a [TOHATSU] 20-HP four-stroke-power-cycle outboard engine. Since I raised the motor 0.5-inch [the top speed is now guessed to be] 29-MPH, and prior to raising was measured on a GPS receiver to be 27-MPH. I have not changed the factory-supplied propeller, which is a 10-pitch three-blade aluminum propeller. With my 200-lbs carcass and with my wife aboard (who sits in front of me, midship) [the TENDER 11] runs 21-MPH. Does anyone have experience with SOLORA four-blade? Have done lots of propeller changing on other boats with varied success. Thanx, chappy
contender	posted 08-25-2014 09:11 PM ET (US) Someone gave me a 4 blade stainless prop, no name, no numbers of any kind, took it to a prop shop and it measures 10x10, I have been running it seems to be better that the alum one I had.