Moderated Discussion Areas
  ContinuousWave: Small Boat Electrical
  Furuno 520T-HPD Bronze Thru-Hull Ducer,1 Kw, 10 pin

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Furuno 520T-HPD Bronze Thru-Hull Ducer,1 Kw, 10 pin
Ramsey posted 07-11-2006 01:20 AM ET (US)   Profile for Ramsey   Send Email to Ramsey  
Dear All

I would like to buy 520T-HPD Bronze Thru-Hull Transducer with Temp, 1kW (10 pin) for Furuno FCV620. Is it match? On Furuno FCV620 manual, standard ducer for Furuno FCV620 is 525ST-MSD.But 520T-HPD is much more sensitive than 525ST-MSD according to Airmar website info. Is there anyone can advise me on this matter.

Thanks in advance.

Captain Trevally posted 07-13-2006 02:05 AM ET (US)     Profile for Captain Trevally  Send Email to Captain Trevally     
I read the manual for Furuno FCV620/585. They both have same manual. For FCV620 you can not use the 1kW transducer because the Furuno FCV620 only 600W. But you can use 1kW trandsducer for Furuno FCV585 but you have to purchase the matching box MB 110. You can download the manual at and read the manual.


Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.