ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Small Boat Electrical   Electrical Distribution Board    search | FAQ | profile | register | author help

Author	Topic:   Electrical Distribution Board
Ferryman	posted 08-25-2007 05:20 AM ET (US)         Here are some pics of an electrical distribution board I have made up for my 2004 Montauk.
Chuck Tribolet	posted 08-25-2007 07:22 AM ET (US)             Blue Sea makes a version with a built-in buss bar for the battery negative side so you don't need a separate buss bar. Chuck
Ferryman	posted 08-25-2007 12:16 PM ET (US)             Yeah I have seen it on their website. I decided I would keep the ground wires well clear of the positive wires, so opted for the seperate busbar. Plus I think I will get a neater installation this way
Ferryman	posted 08-25-2007 03:36 PM ET (US)             Final pic before installation. The panel will be bolted inside the console using 4-6mm X 40mm Stainless machine screw and 1" stainless steel washers. http://www.the-ferryman.com/DistributionBoard3.jpg

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion