ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Small Boat Electrical   Lenco with Smartcraft    search | FAQ | profile | register | author help

Author

Topic:   Lenco with Smartcraft

highanddry

posted 07-09-2009 11:18 AM ET (US)         Does anyone know if there is a switched circuit or provided wire or 12 volt accesory wire that could be used to connect to the Lenco "orange" auto retract wire in he Smartcraft system? This wire only needs to see a 12 volt "ON" when the key is on and no voltage when the key is off. The logic circuit in the Lenco control box sees the voltage on and when it switches off the auto retract system engages lifting the tabs. But with Smartcraft, dangerous doings ocurr if you slice into a hot wire so therefore the question?

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic Whalers