Moderated Discussion Areas
  ContinuousWave: Small Boat Electrical
  ICON Pro RPM Gauge Menu Map

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   ICON Pro RPM Gauge Menu Map
jimh posted 03-05-2014 11:00 AM ET (US)   Profile for jimh   Send Email to jimh  
I have created a mapping of the configuration options for the ICON Pro RPM gauge at

The mapping gives the overall structure of the configuration menus to a reasonable depth. Not every menu is explored to its ultimate depth, as some go on a layer or two beyond what is shown. This mapping may be helpful in locating the section of the configuration menu that contains particular parameters. It is much easier to browse the mapping on-line than to navigation through all the menus on the actual gauge. Indeed, that is why I created the mapping.

Note: I usually announce new permanent reference articles related to small boat electrical topics in this forum at the time I create them, but I seem to have neglected to announce this one when it was first created in November 2013.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.